8
CAUTION:
The warnings and cautions mentioned in this user manual can not
cover all possible conditions and situations that may occur. It must be under-
stood by the operator that common sense and caution are factors which can-
not be built into this product, but must be applied.
SAFETY INSTRUCTIONS….cont
This abrasive cut off saw is double insulated; This means the operator is
separated from the tool's electrical system by two complete sets of electri-
cal insulation. This extra layer of insulation is intended to protect the user
from electrical shock due to a break in the wiring insulation. All exposed
metal parts are isolated from the internal metal motor components with
protecting insulation. Double insulated tools do not need to be grounded
(earthed). Servicing of a tool with double insulation requires extreme care
and knowledge of the system and should be performed only by a suitably
qualified person.
Some metals and metal composites have the potential to be high-
ly toxic; always wear a face mask when operating saw.
When using the saw always ensure the operator as well as those in
the area wear ear protection.
When using the saw always ensure the operator as well as those in
the area wear eye protection.
17
PARTS LIST - 01308
Ref. No.
Description
SIP Part No.
Ref. No.
Description
SIP Part No.
1.
Lock Bolt
WK08-00001
31.
Clamp Nut
WK08-00031
2.
Screw
WK08-00002
32.
Screw
WK08-00032
3.
Washer
WK08-00003
33.
Spring Washer
WK08-00033
4.
Locking Handle
WK08-00004
34.
Roll Pin
WK08-00034
5.
Rubber Foot
WK08-00005
35.
Split Pin
WK08-00035
6.
Base
WK08-00006
36.
Washer
WK08-00036
7.
Fixed Clamp Jaw
WK08-00007
37.
Screw
WK08-00037
8.
Washer
WK08-00008
38.
Motor Cover
WK08-00038
9.
Lock Washer
WK08-00009
39.
Brush Spring
WK08-00039
10.
Bolt
WK08-00010
40.
Brush Set
WK03-00267
11.
Spark Deflector
WK08-00011
41.
Screw
WK08-00041
12.
Bolt
WK08-00012
42.
Brush Holder
WK08-00042
13.
Pivot Shaft
WK08-00013
43.
Screw
WK08-00043
14.
Lock Pin
WK08-00014
44.
Housing
WK08-00044
15.
Ring
WK08-00015
45.
Rubber Cover
WK08-00045
16.
Lock Pin Cap
WK08-00016
46.
608 Bearing
WK08-00046
17.
Screw
WK08-00017
47.
Stator
WK03-00274
19.
Nut
WK08-00019
48.
Fan Baffle
WK08-00048
20.
Washer
WK08-00020
49.
Screw
WK08-00049
21.
Lock Nut
WK08-00021
50.
Armature
WK03-00277
22.
Torsion Spring
WK08-00022
51.
Screw
WK08-00051
23.
Nut
WK08-00023
52.
Spring Washer
WK08-00052
24.
Small Lead Screw
WK08-00024
53.
Bearing Cap
WK08-00053
25.
Thread Pin
WK08-00025
54.
Flange Lock Pin
WK08-00054
26.
Clamp Jaw
WK08-00026
55.
Bearing
WK08-00055
27.
Washer
WK08-00027
56.
Spring
WK08-00056
28.
Spring Washer
WK08-00028
58.
Arm
WK08-00058
29.
Nut
WK08-00029
59.
Bearing
WK08-00059
30.
Clamp Base
WK08-00030
60.
Gear
WK08-00060
