10
Guarantee:
This SIP abrasive cut off saw is covered by a 12 month parts and labour warranty cov-
ering failure due to manufacturers defects. This does not cover failure due to misuse or
operating the abrasive cut off saw outside the scope of this manual - any claims
deemed to be outside the scope of the warranty may be subject to charges Includ-
ing, but not limited to parts, labour and carriage costs.
Failure to regularly clean your abrasive cut off saw will shorten its working life and re-
duce performance. The warranty does not cover consumable items such as motor
brushes and abrasive discs etc.
Note:
Proof of purchase will be required before any warranty can be hon-
oured.
GUARANTEE
Note:
If any of the above are missing or damaged, contact your distributor
immediately.
CONTENTS AND ACCESSORIES
Abrasive Cut Off Saw
Manual
Hex. key
15
MAINTENANCE….cont
REPLACING THE BRUSHES
Remove the rear motor cover by loosening and removing the 2 screws (M)
(Photo 006).
Pull up the brush spring (N) and pull the old brush out (O) (Photo 007).
Pull the brush wire off the connection (P) (Photo 008).
Fit the new brush in reverse order.
Repeat for the other side.
006
M
N
007
O
008
P
WIRING DIAGRAM