background image

SINTES 

19

ULTRAPEEN         

8. LIMITATION OF WARRANTY 

 

8.  LIMITATION OF WARRANTY 

‰

 

The UP-600 system is designed for maximum operator safety and incorporates 

built-in safety devices.  Any modifications to these safety features will void the 

warranty. The Manufacturer assumes no responsibility for consequential 

damages incurred due to modifications to the said equipment. 

‰

 

Under no circumstances shall Manufacturer be liable to the Purchaser or to any 

other person for any incidental or consequential damages or loss of profit or 

product resulting from any malfunction or failure of this device or due to 

unexpected force-major circumstances. 

 

‰

 

Within the Warranty period, the Manufacturer will repair or replace free of charge, 

at his sole discretion, all parts that are defective due to poor workmanship upon 

shipment of the unit to the Manufacturer (the costs of shipment to and from the 

Purchaser are not covered under the Warranty and are the sole responsibility of 

the Purchaser). 

‰

 

Manufacturer’s liability, whether based on warranty, negligence or other cause, 

arising out of and/or incidental to sale, use or operation of the device elements, or 

any part thereof, shall not in any case exceed the cost of repair or replacement of 

the defective equipment, and such repair or replacement shall be the exclusive 

remedy of the Purchaser, and in no case will be responsible for any and/or all 

consequential or incidental damages including without limitation, and/or all 

consequential damages arising out of commercial losses. 

 

‰

 

The warranty does not apply and may be voided for equipment subject to unauthorized 

modifications, repair, misuse, abuse, negligence or accident.

 

 

‰

 

Equipment that in our judgment shows evidence of having been used in violation of 

operating instructions will be ineligible for service under this warranty. 

 

 

Summary of Contents for UltraPeen UP-600





















Reviews: