Sinocare TRUE METRIX AIR, Manual

Page: 58 / 78

20
6.2.2 How to Test Control Solution
Use ONLY 真睿 TRUE METRIX Control Solution for Control
Test.
1. Check dates on control solution label and test strip vial
label. Do not use control solution if control solution - 3
months after opening or date next to on label (whichever
comes first), and test with a new blood glucose control
solution. Do not use test strips - 4 months after opening or
date next to symbol (whichever comes first), and use new test
strip for testing.
2. Allow control solution, vial of test strips and meter to
adjust to room temperature for 10 minutes before use. If it is
the first time to open the blood glucose quality control bottle,
please mark the date on the bottle label.
3. Gently swirl or invert control solution bottle to mix.DO
NOT SHAKE! Remove one test strip from vial. Close test strip
vial immediately. Use test strip quickly after removal from vial.
4. Insert test strip into Test Port. Meter turns on. Keep test
strip in meter until testing is finished. Do not add control
solution to test strip before inserting into meter.
5. Remove cap from control solution bottle. Gently
squeeze a drop onto a clean tissue. Wipe off bottle tip and
discard tissue. Gently squeeze a drop onto a small piece of
unused aluminum foil.
6. Touch Sample Tip of test strip to top of drop of control
solution. Allow drop to be drawn into test strip.
7. Remove test strip from drop when meter begins testing.