Sinocare TRUE METRIX AIR, Manual

Page: 50 / 78

12
1.With meter off, press and hold “•” Button until the
full Display is shown and a series of beeps sound. Release
“•” Button. Meter goes into Set Up.
Note: If the meter turns off at any time during Set Up, go
back to Step 1 and begin again.
Set Time/Date
1. The hour flash after enter the setting mode. Press “
or “ ” Button on top of the meter to select the hour. Press
“•” Button to set.
2. The minute flash after setting hour. Press “ ”
or “ ” to select the minutes. Press “•” Button to set.
3. Repeat step 2 to set month, date and year.
Note: Meter beeps every time a setting is confirmed.
Set Bluetooth Smart (only for 真睿 TRUE METRIX AIR)
Uploading results using the Bluetooth Smart feature
allows meter to send results by connecting Bluetooth device.
After setting the year, press “ ” or “ ” Button to
turn on or off the Bluetooth Smart feature. Press “•” Button
to set. Meter goes to set Event Tags.
4.2 Meter set up
Meter comes with pre-set time and date. The Event Tags,
Ketone Test Alert and all Test Reminders are off. Bluetooth
function is initially turned on (only for 真睿 TRUE METRIX AIR).
Before using the meter for the first time or after a battery
change, please check the time, date. Follow these steps to
update the Settings if needed.
”
Button