Sinocare TRUE METRIX AIR, Manual

Page: 49 / 78

11
4.1 Changing Battery
4.Operation
Do not recharge battery. USB cable is only for data
transmission. Do not use USB cable to recharge. Battery may
explode if mishandled. Do not dispose of battery in fire. Do
not take apart or attempt to recharge battery. Don't throw
away, dispose according to local regulations.
The meter use one 3V CR2032 lithium battery (non-re-
charge). Replace battery when display shows low battery
error.
1.Lift tab on Battery Door.
2.Turn meter over, dispose according to local regulations.
3.Insert new battery, positive (“+”) side facing up. Close
Battery Door
4.Press “•” Button to turn meter on. If meter does not
turn on, check that battery was installed properly. Install the
battery cover and repeat step 4.Contact for assistance if
problem persists.
Note: If battery is out of meter or low battery, meter may
reset to original factory settings. Verify settings are correct
after replacing battery by, going into Meter Set Up and
checking time, date, Ketone Testing Alert, and Testing
Reminders. If not, please enter the setting mode and change
the setting. Results in Memory are not deleted, if battery is
low or removed for any length of time.