Sinocare TRUE METRIX AIR, Manual

Page: 57 / 78

19
Note: The Automatic Self-Test does not take the place of
running a Control Test.
1. Insert a test strip into the Test Port.
2. If the blood glucose meter works normally, the blood
glucose meter will display in full screen, the time will be
displayed on the top of the screen, and the symbol of blood
drop will blink, check for missing segments.
3. If an error message appears, do not use the blood
glucose meter for testing and see Troubleshooting.
6.2 Control Test
The quality control range affixed to the test strip bottle
is not the recommended blood glucose level, and is only used
for reference to the quality control solution test results. Do not
take the quality control solution.
6.2.1 When to perform control test
-before using the meter for the first time;
-for practice to ensure your testing technique is good;
-when opening a new vial of test strips;
-occasionally as a vial of test strips is used;
-if results seem unusually;
-whenever a check on the glucose meter or test strips is
working properly;
-if meter damage is suspected (meter was dropped,
crushed, wet, etc.);
Important note: Three levels of control solution are
available for Control Tests. Please use at least 2 concentrations
of control solution to test whether the system is working
properly.