background image

CODE

XXX

CODE

Abb

ott D

iabe

tes C

are In

c. 1360

 South Loop Road, Alameda, C

A 94

502

   A

RT3

65

04

 Re

v. 

1 0

8/

15

Sensor Pack | Envase del sensor

Customer Service | Atención al cliente:

1-855-632-8658

XXXXXXXXXXX

XXX

YYYY-MM-DD

FreeStyle Libre

STEP 3

STEP 6

STEP 9

G

et Ready

A

pply S

ensor

P

repar

e S

ensor A

pplic

at

or

Wash site using a plain soap,

dry, and then clean with alcohol

wipe. Allow site to air dry before

proceeding.

Peel lid completely off Sensor Pack. 

Unscrew cap from Sensor Applicator.

CAUTION: 

Sensor codes 

must match on Sensor Pack 

and Sensor Applicator or 

glucose readings will be 

incorrect.

Refer to your User’s Manual for full System instructions and information.

Touchscreen

Home Button

USB Port

Sensor 

Pack

Reader

Place Sensor Applicator over site 

and push down firmly to apply 

Sensor. 

CAUTION: 

Do not push down on 

Sensor Applicator until placed 

over prepared site to prevent 

unintended results or injury.

Make sure Sensor is secure. 
Discard used Sensor Applicator 

and Sensor Pack according to 

local regulations.

Gently pull Sensor Applicator 

away from your body.

Quick Start Guide for

FreeStyle Libre 2 Reader

STEP 1

STEP 4

STEP 7

STEP 2

STEP 5

STEP 8

Line up dark mark on Sensor 

Applicator with dark mark on 

Sensor Pack. On a hard surface, 

press down firmly on Sensor 

Applicator until it comes to a stop. 

Sensor Applicator is ready to 

apply Sensor.

CAUTION: 

Sensor Applicator 

now contains a needle. Do not 

touch inside Sensor Applicator 

or put it back into Sensor Pack.

Lift Sensor Applicator out of 

Sensor Pack. 

Lid

Cap

Sensor

Sensor

Applicator

Codes on labels 

must match

 

 1

 

Assemble and Apply  

    Sensor to your body

 

 2

 

Start new Sensor with Reader 

 

 3

 

Check your glucose whenever you    

    want for up to 14 days

Wait 60 minutes 

for start-up

Select site on back of upper arm.

Do not use other sites as these may 

result in inaccurate glucose readings.

Note:

 Avoid scars, moles, stretch 

marks, lumps, and insulin injection 

sites. To prevent skin irritation, 

rotate sites between applications.

Setup Overview

 

 1

 

Assemble and Apply Sensor to the back of your upper arm 

FLASH GLUCOSE MONITORING SYSTEM

4.5”

4.5”

4.5”

Reviews: