© Jun 2020
3-10
GTJZ0408SE&0608SE&0408ME&0608ME Operation Manual
WELDING HAZARDS
•
Comply with the welder manufac-
turer’s recommendations for pro-
cedures concerning proper use of
the welder.
•
Welding leads or cables may only
be connected after turning off the
power unit.
•
Carry out welding operations only
after the welding cable has been
correctly connected.
•
Do not use the machine as a
ground wire during welding
operation.
•
At all times, make sure that the
power tools are completely stored
in the working platform. Do not
hang the power tools on the rail-
ing of the working platform or the
work area outside the working
platform, or hang the power tools
directly by the wire.
Before performing welding, grinding and polishing work,
welders must seek permission of the responsible de-
partment at the workplace.
AFTER USING THE
MACHINE
1.
Choose a safe parking location that is on sturdy,
level ground and that is free of obstructions. Avoid
areas with heavy traffic.
2.
Lower the platform.
3.
Turn the emergency stop switch of the ground con-
troller to the “OFF” position
4.
Turn the key switch to the “OFF” position and re-
move the key to avoid unauthorized use of the
machine.
5.
Block the wheels with the wheel wedges.
6.
Charge the battery.
NOTICE
After using the machine, the power off switch must
be disconnected.
Summary of Contents for 1530SE
Page 2: ......
Page 6: ...This Page Intentionally Left Blank ...
