© Jun 2020
3-8
GTJZ0408SE&0608SE&0408ME&0608ME Operation Manual
COLLISION HAZARDS
•
Never operate a machine danger-
ously or for fun.
CRUSH HAZARDS
A potential crush hazard exists during movement of the
machine. Always keep body parts and clothing a safe
distance from the machine during machine operation.
CRUSH HAZARDS
•
Do not place your hands and arms
where they may become crushed
or trapped.
•
Do not work in or under the plat-
form or near the scissor arms
when the safety lever is not in
place.
•
Maintain good judgment and plan-
ning when using the controller on
the ground to operate the ma-
chine. Maintain proper distance
between operator, machine and
fixed object.
EXPLOSION AND FIRE
HAZARDS
EXPLOSION AND FIRE HAZARD
Do not use the machine or charge the
battery in hazardous or potentially
flammable or explosive atmospheres.
DAMAGED MACHINE
HAZARDS
NOTICE
To avoid machine damage, follow all operation and
maintenance requirements in this manual and the
Maintenance Manual.
UNSAFE OPERATION HAZARDS
•
Do not use the machine if it is
damaged or not in proper operat-
ing condition.
•
Thoroughly inspect and test for all
functions of the machine before
use. Immediately mark and stop
damaged or faulty machines.
•
Ensure that all maintenance oper-
ations have been performed in ac-
cordance with this manual and the
corresponding
Maintenance
Manual
.
•
Make sure all labels are in place
and are legible.
•
Ensure that the
Operation Manual
and
Maintenance Manual
are
sound, easy to read and stored in
the storage compartment on the
platform.
BODILY INJURY HAZARDS
Always follow all operation and maintenance require-
ments in this manual and the .
UNSAFE OPERATION HAZARD
Do not operate the machine when
there are oil spills/leaks. Oil spills or
leaks in hydraulic fluids may pene-
trate and burn the skin.
NOTE:
The operator must carry out maintenance dur-
ing the pre-operation inspection only. During operation,
keep the left and right doors of the chassis closed and
locked. Only trained service personnel can open the left
and right doors to repair the machine.
Summary of Contents for 1530SE
Page 2: ......
Page 6: ...This Page Intentionally Left Blank ...
