9
The analogue component outputs are connected to the BNCs,
‘Y Out’, ‘Pb
Out
’ and ‘Pr Out’. The specification for the outputs is shown in Table 2. The
component output specification is detailed in Appendix A.
Parameter
Specification
Comments
Connector Type
BNC
Output impedance
75Ω
Output return loss
>30dB
0-5MHz
Y output level
1.0V pk.pk
Nominal 100% colour bars
input
Cb/Cr output levels
700mV pk-pk
Nominal 100% colour bars
input
Table 2 Analogue Component output Specifications
The serial digital interface (SDI) output is connected to the
‘SDI Out’ BNC
and its specifications are shown in Table 3.
The SDI output conforms to the SMPTE-259M specification. The SDI output
specification is detailed in Appendix A.
Parameter
Specification
Comments
Connector Type
BNC
Output impedance
75Ω
Fixed termination
Output return loss
>15dB
50Hz-270MHz
Output level
800mV pk-pk ± 10%
Jitter
<0.2UI
Table 3 SDI Output Specifications
The serial digital interface (SDI) input (only used in encoder mode) is
connected to the
‘SDI In’ BNC and its specifications are shown in Table 4.
The SDI input conforms to the SMPTE-259M specification.
Parameter
Specification
Comments
Connector Type
BNC
Input impedance
75Ω
Fixed termination
Input return loss
>15dB
50Hz-270MHz
Input level
800mV pk-pk
Nominal
Table 4 SDI Input specification.
Summary of Contents for SM01
