manualshive.com logo in svg

Singmai Electronics SM01, User Manual

The Singmai Electronics SM01 delivers exceptional performance with its innovative features. Enhance your user experience by accessing the free User Manual, available for download at manualshive.com, to unlock the full potential of this cutting-edge device. Obtain valuable insights and maximize your enjoyment with this convenient and comprehensive manual.

Share
Download
background image

16 

 

P’meter (Parameter): 
 

Note that some combinations of the parameter settings can give invalid 
outputs and may result in clipping of the signal. 
 

CVBS 

Adjusts the output amplitude of the composite video output. Default value is 
100% (gain of 1). Range is 0-130%. 

 
CVBS-Y 

Adjusts the output amplitude of the luma component of the composite video 
output. Default value is 100% (gain of 1). Range is 0-130%. 

 
CVBS-C 

Adjusts  the  output  amplitude  of  the  chroma  component  of  the  composite 
video output. Default value is 100% (gain of 1). Range 0-130%. 

 
Burst 

Adjusts  the  output  amplitude  of  the  colour  burst  of  the  composite  video 
output. Default value is 100% (gain of 1). Range 0-130%. 

 
CVBS-S 

Adjusts the output amplitude of the synchronizing signals of the composite 
video output. Default value is 100% (gain of 1). Range is 0-130%. 

 
CVBS-B 

Adjusts the output black level of the composite video  output. Default value 
is pedestal value for NTSC-M or 0mV for other standards). Default value is 
0 (offset of 0mV). Range is ±100. 

 
NTSCHue 

Adjusts  the  phase  of  the  chroma  component  (hue)  for  composite  video 
output (NTSC-M/-J/-443 only). Default value is 0deg. Range is ±180deg. 

 
FSc 

Adjusts  the  frequency  of  the  subcarrier  for  the    composite  video  output. 
Default value is 0Hz. Range is ±400Hz. 

 
YPbPr-Y 

Adjusts  the  output  amplitude  of  the  luma  (Y  channel)  of  the  component 
YPbPr  analogue  video  output.  Default  value  is  100%  (gain  of  1).  Range  is 
0-130%. 

 

Summary of Contents for SM01































































Reviews:

No comments

Related manuals for SM01

G-Lab M4L User Manual preview
M4L
Brand: G-Lab Pages: 16
Califone Music Maker 2396 Specifications preview
Music Maker 2396
Brand: Califone Pages: 1
OT Systems FT210AB Series Installation And Operation Manual preview
FT210AB Series
Brand: OT Systems Pages: 16
Goobay 60267 User Manual preview
60267
Brand: Goobay Pages: 24
Net Optics OM3131-GIG-R Installation Manual preview
OM3131-GIG-R
Brand: Net Optics Pages: 15
JTS UA-960 Instruction Manual preview
UA-960
Brand: JTS Pages: 8
Dish Network Pocketdish AV402E Quick Reference Manual preview
Pocketdish AV402E
Brand: Dish Network Pages: 2
Guardian QT027 Specifications preview
QT027
Brand: Guardian Pages: 4
Patton electronics 2035-25M User Manual preview
2035-25M
Brand: Patton electronics Pages: 7
Sencore MRD 7000 User Manual preview
MRD 7000
Brand: Sencore Pages: 126
Z-Band Z-IP Encode 004 User Manual And Installation Manual preview
Z-IP Encode 004
Brand: Z-Band Pages: 22
Soundfield UPM-1 User Manual preview
UPM-1
Brand: Soundfield Pages: 13
Nextar MP1607 User Manual preview
MP1607
Brand: Nextar Pages: 27
M-system W2AP Instruction Manual preview
W2AP
Brand: M-system Pages: 4
Audio Nemesis DC-1 VLE Owner'S Manual preview
DC-1 VLE
Brand: Audio Nemesis Pages: 10
Yuan HD2HD-4KS User Manual preview
HD2HD-4KS
Brand: Yuan Pages: 15
CYP CH-507RXWP Operation Manual preview
CH-507RXWP
Brand: CYP Pages: 16
Keysight Technologies E5053A User Manual preview
E5053A
Brand: Keysight Technologies Pages: 37

Brands by name

Popular brands

Load more brands