Singer Stylist 7258, Instruction Manual

Page: 47 / 60

45
5. 在衣物上标出纽孔的位置。
Carefully mark the position of buttonhole on your garment.
7. 压脚的起针标记对着布料上纽孔的起针标记，然后
放下压脚。
Align the buttonhole mark on the fabric with the mark on the
buttonhole foot, and then lower the buttonhole foot.
8. 轻拉着上线，开始缝纫。
While holding the top thread, start the machine.
* 锁纽孔将按照下图所示步骤自动完成。
Sewing will be completed automatically in the following order.
9. 当完成锁纽孔缝纫，用开纽孔刀（拆线刀） ，在纽孔
的中间割开扣孔，小心不要割断线迹。
When sewing is finished, use a buttonhole opener/seam ripper
to open up the fabric in the center of the buttonhole. Be careful
not to cut any of the stitching.
6. 放在压脚下，在布料下向后拉出下约 10 厘米线头。
Place the fabric under the foot. Pull out the bobbin thread
underneath the fabric to a length of about 4 inches to the rear.
布料上的纽孔起针标记
Fabric marking
锁孔起针位置
Buttonhole foot alignment position
布料上标的纽孔起针标记
Fabric marking
（压脚）起针标记
Mark