background image

5

ENGLISH

•  

Any person who is involved with working on or breaking into a 
refrigerant circuit should hold a current valid certi

fi

 cate from an 

industry-accredited assessment authority, which authorizes 
their competence to handle refrigerants safely in accordance 
with an industry recognized assessment speci

fi

 cation.

•  

Servicing shall only be performed as recommended by the 
equipment manufacturer. Maintenance and repair requiring 
the assistance of other skilled personnel shall be carried out 
under the supervision of the person competent in the use of 

fl

 ammable refrigerants.

IMPORTANT SAFETY INFORMATION

• 

Avoid installation behind a door. 

•  

Use only with the supply voltage speci

fi

 ed on the rating plate 

of the Dehumidi

fi

 er.

•  

Before installing, cleaning and servicing turn off the power and 
unplug the unit.

• 

Do not place appliance close to a radiant heat source.

•  

Do not use the appliance near 

fl

 ammable gas of combustibles, 

such as gasoline, bezene, thinner, etc.

•  

Do not immerse in liquid or allow liquid to run into the interior of 
the appliance, as this could create an electrical shock hazard.

•  

Do not use this appliance on a wet surface, or where it can fall 
or be pushed into water.

•  

Do not reach for an appliance that has fallen into water. Switch 
off at supply and unplug immediately.

•  

Do not operate any appliance with a damaged cord, plug or 
after the appliance malfunctions or has been dropped or dam-

Summary of Contents for Dry Up SDHM-20L ECO

































































Reviews: