Sinexcel PWS1-500KTL-NA, User Manual, Page: 20 / 49

12 Chapter IV Device Installation
Chapter IV Device Installation
Transport and storage
Cabinet and module of the storage inverter are packed together in the packing cases. During device transport and storage,
pay attention to the logo on the packing case.
The storage inverter is modularly designed so as to facilitate device positioning and transport. The selection of storing position
should ensure that:
 There is no corrosive gas around it.

There are over-wetting and high-temperature sources.
 It is not a dusty environment.
 It complies with the firefighting requirements.
Attention

During cabinet transport and storage, stacking is not allowed. The device top cannot be placed with other articles.

The cabinet should be placed vertically at forward direction. Don’t keep it upright place it horizontally.
Removal
When removing the module of the storage inverter which is not unpacked from packing case, a forklift can be used to remove
the whole case.
Users can lift the device bottom with a forklift or remove the cabinet of single the storage inverter through the lifting hole on its
top with a crane. It can be transported alone. Refer to Fig. 4-1.
Fig.4-1 Moving method for storage inverter
Warning