22
Load information
Display load power WATT or VA value of the ratio
Battery status information
Display the battery voltage capacity of the ratio
Fault/warning
Display buzzer, warning, mains, batteries, charging state identification
Output voltage, frequency and bypass choose information
Choose UPS output voltage, choose 200VAC anyone
208VAC,220VAC,230VAC under No output mode or bypass mode.
Choose UPS output frequency, choose anyone frequency 50Hz or 60Hz
under No output mode or bypass mode.
Choose buzzer switch, choose buzzer opening and closing under No output
mode or bypass mode.
4.2 Operation Mode
4.2.1 Normal mode
In the normal mode, the display on the front panel is shown in the following diagram. The utility
power indicator and the inverter indicator are turn on. The load/battery capacity indicator will be
turned on in accordance with the load capacity connected.
