12
Figure 3-2 Connection method of output for PANTHER 1KR(XL)~3KR(XL)
Apart from using the socket for output, PANTHER 3KR(XL) has the terminal block
available for output as well when the output current over 10A recommended. The wring
configuration is shown in the following diagram.
1) Remove the cover of the terminal block;
2) Use AWG14 (2.1mm
²
) wires for wiring configuration;
3) Upon completion of the wiring configuration, please check whether the wires are
securely affixed;
4) Put back the terminal block cover to the rear panel.
Figure 3-3 Connection method of terminal block for PANTHER 3KR(XL)
