Timer:
Press the time zone buttons on the remote control (figure 8) to activate the delay switch-off timer.
For example, point the remote control directly at the receiver and press the "1" button, the first bulb on the right will turn
white (figure 9), the unit will automatically turn off after 1 hour and return to standby mode. (figure 4).
Press the "2 hr" button to activate the 2 hour timer and press the "4 hr" button to set the 4 hour timer and press the "6 hr"
button to set the 6 hour timer (figure 10).
Please refer to the figure below to illustrate the set timer.
First press the "1h" button and then the "2h" button to activate the 3-hour timer (figure 11).
Press the 1h, 2h, 4h and 6h button in order to activate a timer of maximum 13 hours (figure 12).
INSTALLATION
Please read the manual carefully before installation.
The heater must be installed according to the manufacturer's installation instructions
This heater is supplied with a pair of stainless steel adjustable angle mounting brackets. The adjustable angle allows the heater
to be installed on vertical, horizontal and inclined surfaces.
The ideal mounting position is directly above the area to be heated with longitudinal orientation and vertically facing
downwards. If this is not possible, the heater(s) can be mounted on a wall and angled downwards.
Figure 8
Picture 9:1 hour timer
Figure 10
Picture 11
Picture 12