Heating area (M2)
The radiator panel heater produces radiant heat that heats objects rather than air. Therefore, it is imperative that the objects
to be heated (i.e. people) are inside the surface directly radiated by the heater.
The following diagrams show the approximate heating area based on a closed indoor and outdoor environment. The diagram
shows that the maximum heat output is directly below the heater and the temperature decreases as the user moves away
from the heater.
OPERATION
WARNING!
Light crackling can be heard during the heating or cooling period. This is a normal operating noise.
NOTE:
The discoloration of the paint on the wall of the heater body direct to the ceiling during operation is not a defect. The
colour change for the heating plates is not a defect.
After switching the appliance on for the first time and after long periods of inactivity, the appliance may expel a slight
odour for a short period of time. This does not affect the use of the heater.
To exclude unpleasant burning smells, it is recommended to keep the heater clean by avoiding dust accumulation on it
.
The distance between the heater and the remote control must be less than
3 meters,
and the remote control must
point directly at the receiver on the front panel during operation.