heater.
MAINTENANCE
•
Maintenance should only be carried out by a qualified electrician.
•
During operation it is necessary to periodically (once a year) check the electrical cable contacts and terminal connectors for
proper tightening.
•
If the heater gets dirty, wipe off the dust with a damp cloth, the parts radiants must be cleaned cold with a soft damp cloth.
WARNING!
Never immerse the appliance in water! Danger of death!
TROUBLESHOOTING
The possible malfunctions are shown in the table below.
SYMPTOMS
CAUSE
Does not heat up / No function indicators
Check that the power supply is connected and switched on
The heater smells when it is used for the
first time.
This is caused by the oil or dust left over from the production process
and will stop after a short period of time.
Weak odour for short periods after the
heater is switched on
This is normal and should stop after a short time.
The heater stinks when turned on after
periods of inactivity
Formation of debris and dust on the heater, Turn off the heater and let
it cool and then clean it
Tinkle noises when the heater is on and
after being switched off
These are noises of expansion and contraction of the metal components
of the heaters and is normal
Poor heating performance
Exposure to extreme environmental conditions such as strong winds /
excessively cold temperatures can lower the heating performance of an
outdoor installation.
The unit is not installed in the correct position, perhaps too high or the
heater is too small for the recommended area.
When to contact the service department or authorized seller
There are no user-serviceable parts in this unit, but only an authorized person can service or maintain this unit by a qualified
electrician.
SYMPTOMS
CAUSE
There is a burning smell and strange
sounds (different from normal expansion
and contraction noises) coming from the
unit.
Turn off the heater and contact the seller.