189
2. Increase the value using the
arrow direction keys
, or typing in the wanted values
using the number key pad, and then press [
Selec
t] (or [
Save
] button).
The input range is 0~100 by 1 unit(=1%).
■
Black NG Level
When reading a strip image in performing calibration, you can set the criterial standard
values for NG Level of Black Strip image.
1. Select Scanner Server in the diagnostic mode.
2. Increase the value using the
arrow direction keys
, or typing in the wanted values
using the number key pad, and then press [
Selec
t] (or [
Save
] button).
The input range is 0~100 by 1 unit(=1%).
Scanner Free Run
This test is used to decide whether the scanner related devices attached to the base unit
work normlal or not.
The following are available in the Scanner Free Run mode. ,
1. Check Scanner Motor / Home Sensor work normal.
2. Check the assembly status of the mechanical parts(Gear belt and CIS guide roller)
Once Scanner Free Run test starts, CIS moves to A4 scan position, and then operates to
return to Home Sensor.
ADF Free Run
This test is used to decide whether ADF mechanical parts attached to the base unit work
normlal or not.
The following are available in the ADF Free Run mode.
1. Check the sensor at FEED or Trans Motor/ADF works normal.
2. Check the assembly status of the mechanical parts.
Once ADF Free Run test starts, ADF operates until the tray is empty.
Present Sensor Check
This test is used to decide whether Present Sensor attached to ADF works normlal or not.
It indicates the follwoing upon detection of the original in ADF
Original present : "1" / Original absent: "0"
Summary of Contents for M611
