Fan Coil Unit Wall Mounted Type
20
7. Notices for installation
7.1 Important Notices
1. The unit installation work must be done by qualified personnel according to the local rules and
this manual.
2. Before installing, please contact with local authorized maintenance center, if unit is
not installed by the authorized maintenance center, the malfunction may not solved, due to
discommodious contacts.
3. When removing the unit to the other place, please firstly contact with the authorized
Maintenance Center in the local area.
7.2 Basic Requirements For Installation Position
Installation in the following place may cause malfunction. If it is unavoidable, contact with
service center please.
(1) Place where strong heat sources, vapors, flammable gas or volatile object are emitted.
(2) Place where high-frequency waves are generated by radio equipment, welders and medical
equipment.
(3) Place where a lot of salinities such as coast exists.
(4) Place where the oil (machine oil) is contained in the air.
(5) Place where a sulfured gas such as the hot spring zones is generated.
(6) Other place with special circumstance.
7.3 The Unit Installation Position Selection
(1) The air inlet and outlet vent should be far from the obstruction, make sure that the air can be
blown through the whole room.
(2) Select a position where the condensing water can be easily drained out.
(3) Select a location where the children can not reach.
(4) Can select the place where is strong enough to withstand the full weight and vibration of the
unit. And will not increase the noise.
(5) Be sure to leave enough space to allow access for routine maintenance. The height of the
installed location should be 250cm or more from the floor.
(6) Select a place about 1m or more away from TV set or any other electric appliances.
(7) Select a place where the filter can be easily taken out.
(8) Make sure that the unit installation should accord with installation dimension diagram
requirements.
(9) Do not use the unit in the immediate surroundings of a laundry a bath a shower or a
swimming pool.
7.4 Safety Requirements For Electric Appliances
(1) The power supply be used the rated voltage and AC exclusive circuit, the power cable
diameter should be satisfied.
(2) Don’t drag the power cable emphatically.
(3) It should be reliably earthed, and it should be connected to the special earth device, the
installation work should be operated by the professional.
The air switch must have the functions of magnetic tripping and heat tripping, in order to protect
the short circuit and overloading.
Summary of Contents for SF-51H
Page 1: ...USER MANUAL SF 51H SF 68H SF 85H WALL MOUNTED FAN COILS...
Page 2: ......
