Sinclair SF-51H, User Manual

Page: 12 / 32

Fan Coil Unit Wall Mounted Type
8
(2) Press MODE button, select desired running mode ,or press COOL or HEAT mode to enter
the corresponding operation directly.
(3) Press + or-button to set the desired temperature.
(4) Press
FAN button to set fan speed from AUTO, FAN ,LOW MID and HIGH .
(5) Press+_ button to select SWING mode.
Sketch map for
changing batteries
Fig.1
Fig.2
3.5.3 Operation of wireless remote control
(1) Press +and - buttons simultaneously to lock or unlock the
wireless remote control. If it is locked, the mark will display; when
pressing any button, the mark will blink for three times but the air
conditioner has no despondence. If unlocked, the mark will disappear.
(2) Switch between Fahrenheit and Centigrade.
(3) When unit is under Off state, press
MODE and – button
simultaneously to switch between
℃
and
℉
.
3.6 Changing batteries and notices.
(1) Slightly to press the place with , along the arrowhead
direction to push the back cover of wireless remote control. (As show
in figure)
(2) Take out the old batteries. (As show in figure)
(3) Insert two new AAA1.5V dry batteries, and pay attention to the
polarity. (As show in figure).
(4) Attach the back cover of wireless remote control. (As show in figure)
NOTE
:
●
When changing the batteries, do not use the old or different batteries, otherwise, it can cause
the malfunction of the wireless remote control.
●
If the wireless remote control will not be used for a long time, please take them out, and don't
let the leakage liquid damage the wireless remote control.
●
The operation should be in its receiving range.
●
It should be placed at where is 1m away from the TV set or stereo sound sets.
●
If the wireless remote control can not operate normally, please take them out, after 30s later
and reinsert, if they cannot normally run, please change them.