Page 53
6.5.3 VIEWING THE TOTAL GAME MOTIONS COUNT (STATISTICS)
The total number of games with motions accepted by Cycraft after production can be
viewed by selecting the “5. Statistics” item from the configuration main menu.
6.5.4 TESTING THE DIGITAL INPUT/OUTPUT CHANNELS
The digital input/output (DIO) channels in Cycraft can be tested for functionality by
using the LCD panel on the Operator Panel. To carry out DIO test,
1) Bring up the configuration main menu by pressing the MENU/SET button for 2
seconds.
2) Highlight the “1. DIO TEST” item by using the UP and DOWN buttons. The
highlighted item is indicated by the “=>” sign.
3) Press MENU/SET button. This will display the first DIO channel. Pressing the
UP and DOWN buttons will navigate through the different DIO items.
4) Press the MENU/SET button when the desired channel appears. If it is an input
channel, the state of the channel (either ON or OFF) will appear on the screen.
Proper operation can be checked by physically activating the channel and
verifying that the state shown changes accordingly. If it is an output channel, the
current output command will be indicated. Use the UP and DOWN arrows to
change the command state and verify that the output is physically activated (i.e.
lamp turns on and off).
5) When finished, press the ESC switch repeatedly until main screen appears.
6) There are 17 DIO Test items.
¨
Seatbelt Sensor
¨
Game Stop SW
¨
Safety Sensor
¨
Motion Stop SW
¨
Shutdown SW
¨
Keypad 1
¨
Keypad 2
¨
Keypad 3
¨
Keypad 4
¨
Maintenance SW
Summary of Contents for Cycraft
Page 16: ...Page 16 3 NAMES OF MAJOR PARTS 18 11 12 13 14 15 16 17 28 ...
Page 30: ...Page 30 Hexa bolt M8 x 30L DU Bush 10 15 Rubber Washer 11 20 3t Spring Washer Flat Washer ...
Page 73: ...Page 73 10 2 Cabin Schematic SCHEMATIC 2 HERE ...
Page 74: ...Page 74 10 3 MCU Schematic DOCUMENT END SCHEMATIC 3 HERE ...
