Operating Manual TRACSCAN 2.0
V2.0, 2022-05
17 / 36
Table 11: Test Program James Machine
Modified program settings are saved automatically when the instrument shuts down.
4.6.5.
Instrument Settings
Parameter
Description
Basic Settings
Language
Selects the language for Operation and Menu. Currently,
German
and
English
are supported.
Brightness
Sets the Display Brightness to a value between
20%
and
100%
.
Sound
The instrument can generate an acoustic warning signal while in
operation, i.e., while a measurement is being taken. Value
On
ena-
bles the signal.
Function of Print Key This parameter defines the function of the Print Key, i.e., what will
be executed if the instrument is turned on by pressing the Print Key.
The function can be programmed to
Disabled
(no function),
Short
Report
or
Long Report
.
Advanced Settings
Units of Measure
Defines the Units of Measure for distances and temperatures. The
instrument supports
Metric
and
US Customary
. If US Customary is
set, distances will be shown both in Metric (cm) and US Customary
(inch) unit.
Shut Down After
Measurement
Per default, the instrument shuts down after a measurement has
been taken. To avoid delays while taking a series of measurements,
the instrument can be kept alive and a subsequent measurement
can be started while the result of the current measurement still is
displayed (value
No
).
Default User Role
Defines if the user can only take measurements (role
Operator
) or
can also modify the program and instrument settings (role
Supervi-
sor
).
Location Code Size
The length of the location code that can be entered before each
measurement. Maximum size is
8 characters
. Value
0
disables the
location code feature, i.e., the user will not be prompted for a code.
Location Code Type
The location code can either be
Numeric
(characters 0 … 9 or
blank) or
Alphanumeric
(0 … 9, A … Z or blank).
Store Invalid Results Specifies if invalid measurements shall be stored in the archive
(value
Yes
) or shall be discarded (value
No
). A measurement is set
to result “invalid”, if it has been aborted by the user or cannot be
completed due to an error (e.g., wheel spin).
Show Minimum
Value in Report
Defines if the minimum COF value of a measurement shall be
shown in the short or long report. Note that minimum values are
