Simrad SH90
Note
In this manual, the phrase “Click the button” means that you
shall position the cursor over the menu button, and then press
the
Select
button on the Operating Panel.
Certain parameter settings are identified with an asterisk (*). This
symbol indicates the default setting known to perform well under
normal conditions. If you get “lost“ in the parameter settings, the
Default settings
function will bring up these normal parameters.
The
Default setting
function is available on the
Setup
menu, and a
dedicated parameter dialog is used.
In the Simrad SH90 sonar, all parameters are stored. This
function will cause the sonar to remember all the selected
parameter settings, even when the sonar is switched off.
Visual aids
The sonar display contains not only the sonar picture and the
menu system, but also other information that is useful for
efficient operation.
Common information on the display
In nearly all display modes, the following information is
provided.
Figure 6
Visual aids
(CD015013A)
A
B
C
D
E
F
A
Current horizontal gain.
B
Current horizontal range.
C
The cursor’s current geographical position (provided that
the necessary sensor is connected to the sonar).
D
The cursor’s current bearing relative to the vessel or true
north.
E
Current tilt.
F
Current range and depth of the cursor position.
18
323773/C
Summary of Contents for SH90 - REV A
Page 2: ......
Page 8: ...Simrad SH90 6 323773 C ...
Page 83: ...Index 323773 C 81 ...
Page 85: ......