Getting started
4
Please note:
• If the sonar is switched off uncontrolled with the
transducer in its lowered position, the transducer will
normally be hoisted automatically after approximately
one minute. You must however verify that this takes
place. If the transducer is not hoisted automatically, it can
be raised manually by means of the hoist/lower switch in
the Motor Control Unit. If mains power is lost, you can
also use the hand crank provided.
How to perform basic operations
Observe this brief procedure to familiarize yourself with the
basic operations with echo presentations and menu operations.
Echo presentation and menu
1
Once the sonar system is up and running, observe the layout
of the display presentation:
• On the right side, observe the menu system (A).
• On the left side, observe the sonar echo presentation (B).
Figure 3
Basic menu (A) and echo presentation (B)
2
On the Operating Panel, press the
Menu
button (located
above the large trackball).
Menu
323773/C
13
Summary of Contents for SH90 - REV A
Page 2: ......
Page 8: ...Simrad SH90 6 323773 C ...
Page 83: ...Index 323773 C 81 ...
Page 85: ......