
If calling an Intercom speaker, pressing the VOL
and VOL
keys while the PTT key is held to adjust the Intercom speaker
volume. This option is not available if calling another Station
or making an All Speaker / PA call - the current volume set-
tings for each position will be used.
To end the intercom call, press On/C or return the handset to
its cradle.
NOTE
While making an intercom call, all other stations will display
“Station X Occupied”.
NOTE
If the Interrupt Intercom option (section 3.3.4) is disabled and a
VHF transmission is being received, the display will show
“Signal Present” until the transmission has ended. If Interrupt
Intercom is enabled, the intercom call will be interrupted if a
VHF transmission is received.
6.5.2 Receiving an intercom call
If an intercom call is received from another station, the display
will show “Intercom From Stn Y”, where “Y” is the I/D of the
Station making the intercom call (Fig 6.6) -
Instruction Manual
53
Part No. E04297
If the other station is making an All Speakers call, the display
will show “Int All From Stn Y”.
If the other station is making a PA call, the display will show
“P A from Stn Y”.
To accept the call lift the handset from the cradle or press On/C
to cancel the intercom call.
To end the intercom call, press On/C or return the handset to
its cradle.
NOTE
All speaker and PA calls are announcement calls and therefore
do not need to be accepted manually by the receiving stations.
12
I N T ERCOM
AA
FROM STN 2
2
INT
Fig 6.6 - Receiving an intercom call from station 2