
Press Ok to change the channel’s Memory Scan status - i.e if it
is not selected, pressing Ok will add it to the Memory Scan
cycle and vice versa.
Additional channels can be added/removed by entering the
channel number and repeating the above procedure.
Press the VOL
or VOL
key to select another Scanning
menu option, or On/C to return to the main menu.
NOTE
North American users -
Only one Weather channel can be
entered into Memory Scan - if another one is selected, it will
override the existing channel. The Weather channel is not
scanned as part of the Memory Scan sequence - it is used by
the Weather Watch function (see section 6.1).
3.1.3
All Scan show
This function displays all the inhibited channels.
From the scanning menu (section 3.1) select All Scan Show and
press Ok. The display will then show “Showing Channels”
and display all the inhibited channels in sequence.
Press the VOL
or VOL
key to select another Scanning
menu option, or On/C to return to the main menu.
3.1.4
Memory Scan select
This function selects the channels to be used in the Memory
Scan cycle (see section 2.9).
From the scanning menu (section 3.1) select Memory Scan
Select and press Ok - the display will show “Mem Scan Select”.
Enter the relevant channel number using the numeric keypad.
The display will show the channel number and it’s memory sta-
tus - “Mem Scan” if it is not currently selected for Memory
Scan, or “Mem Scan Enabled” if it is already selected (Fig 3.3) -
RS87 VHF
22
Part No. E04297
65
MEM SCAN
AA
ENABLED
B B
INT
65
MEM SCAN
AA
INT
Fig 3.3 - Selecting channel for Memory Scan
CHANNEL CURRENTLY NOT SELECTED
CHANNEL ALREADY SELECTED