2.4 Volume adjustment
To adjust the volume, press the VOL
and VOL
keys to
increase and decrease the setting respectively. Press and hold
the key to increase/decrease the setting rapidly.
The volume setting can be between 1 and 24 (loud).
2.5 Squelch adjustment
To adjust the squelch setting, press the SQ key to enter squelch
adjustment mode, then press the
and
(VOL) keys to
increase or decrease the squelch respectively. Press and hold
the key to increase/decrease the setting rapidly.
The squelch setting can be between 0 (open) and 10.
NOTE
Squelch mode will automatically time out after two seconds if
another key is not pressed. Squelch mode can also be cancelled
by pressing the ON/C key.
2.6 Dual Watch mode
Dual Watch allows the radio to scan between the selected
working channel and the watch channel (the priority channel -
normally 16).
To enter Dual Watch, select the required working channel, then
press Shift and 3 (DW) within two seconds.
If Dual Watch is selected while the handset is off cradle, the
display will show “Place back on cradle”. If the handset is
replaced within ten seconds of selecting Dual Watch, it will
automatically initiate Dual Watch when the handset is
replaced.
The display will show “D/W” - the large digits on the display
indicate the working channel, with the watch channel shown
below in small digits (Fig 2.5) -
Instruction Manual
15
Part No. E04297
6
D/W
AAAAA
16
BBBBBBBBBB
INT
DW
Fig 2.5 - Dual Watch mode