Simrad GN70, Operator And Installation Manual

Page: 37 / 100

| 37
System Configuration | GN70MX610/MX612 Operator and Installation Manual
How to RESET the SIMRAD Antenna: (MX521, MX521A, MX521B, HS80A, MX575C &
MX575D)
1.
Press the
MENU
key.
2.
Scroll to Tools & Settings, press
ENT
.
3.
Scroll to GPS icon, press
ENT
.
4.
Scroll to Antenna Reset menu, press
ENT
.
5.
Select Cold Reset or Factory Default, press
ENT
.
Where:
• Cold Reset - sets the baud rate to 4800, NMEA messages to default and clears the oscillator,
ephemeris and almanac data
• Factory Default - sets the baud rate to 4800 and sets the NMEA messages to default
¼
Note:
Resetting the antenna will automatically change the baud rate of the antenna and the
MX61xJB port 3 to 4800 baud. When normal communication between the MX antenna and
the Junction box is restored, they both will change to 19,200 baud without user intervention.
Normal operation of the system will be restored after 90 seconds.
How to restore the MX61x display to default settings:
1.
Press the
MENU
key.
2.
Scroll to Tools & Settings, press
ENT
.
3.
Select SYSTEMS icon, press
ENT
.
4.
Scroll to Restore defaults, press
ENT
.
5.
Place check mark on each item you want to reset by scrolling to it and pressing the
ENT
key.
6.
Scroll to the OK button and press
ENT
.
7.
The MX61x CDU will restart.
8.
Press the
PWR
key and hold it down until it beeps. Press the
PWR
key momentarily to stop
the beeping.
9.
Turn the power ON by pressing the
PWR
key momentarily.