Simrad CE33 ChartSounder, Manual

Page: 78 / 172

Chapter 6-2 CE33 Pilot menu & navigation examples
Navigation setup:
Anchor alarm distance: 00.50nm
WP circle alarm: 00.10nm OFF
WP and cursor navigation:
XTE alarm: 00.10nm ON
Navigation mode: RHUMBLINE
Route navigation:
XTE alarm: OFF
Auto waypoint shift: WP-circle
Track navigation:
XTE alarm: 00.10nm OFF
Auto trackpoint shift: WP-circle
Navigation mode: RHUMBLINE
+/- Toggle between available values, or...
0-9
key in a new alarm limit
ENT
Confirm entry
Anchor alarm distance
- When setting anchor, check/change the
preset alarm distance, etc., so you will be warned in case you drift
too far from the anchored position. The alarm distance can be set
to anywhere between 0.01 and 9.99nm. See also section 6.3 Anchor
guard. The alarm will automatically reset once you are inside the
limits again.
WP circle alarm
- forms a circle around each waypoint, and the
alarm distance can be set to anywhere between 0.01 and 9.99nm.
The waypoint alarm will be activated when you reach the circle
or the perpendicular line -
WP line alarm
- crossing through the
waypoint. When “Auto waypoint shift” is set to “WP-circle” it will
override the “WP circle alarm” function.
XTE alarm
- forms a corridor along the ideal track. When crossing
one of the boundaries the XTE alarm will be activated.
The
alarm
will automatically reset once you are inside the limits
again. The alarm distance can be set to anywhere between 0.01 and
9.99nm.
In Route navigation the XTE alarm value can be specified for each
route leg - see section 5.2.