User Manual // Simpro Eurover
Original Instructions // English // v34.0 // April 2022 // Page
8
2.
Operating Instructions
2.1
Before use
Before operating a Eurover, the following points should be checked to ensure the machine is
stable and safe to use:
1.
If being used with a mobile base unit, check that:
a.
The machine is correctly positioned beside the destination receptacle.
b.
The operating surface is hard and flat with a slope no greater than 1:12.
c.
The brakes on both castor wheels are applied.
2.
Check that all covers and guarding panels are in place.
3.
Check that the power lead is undamaged and firmly connected.
4.
Check that all personnel other than the operator are clear of the machine.
5.
Check that the EMERGENCY STOP button is released.
6.
Check that the cradle is lowered to the ground.
2.2
Emptying bins
1.
Wheel a full Eurobin into the cradle, taking care that it is properly positioned, and the
quick-release catch is engaged.
2.
Press the RAISE button, holding it down until the Eurobin reaches the inverted position.
3.
Wait for 10-20 seconds while the contents of the Eurobin are emptied.
4.
Press the DOWN button, holding down until the Eurobin rests on the ground.
5.
Press the quick-release bin catch with your right foot and remove the empty Eurobin.
6.
Repeat from step 1) as required.
The cradle may be stopped at any time by either releasing the RAISE/LOWER button or
pressing the EMERGENCY STOP button.
