Chapter 1: Hardware overview
9
Figure 2: OmniCube CN-2000 and CN-3000 front panel
Figure 3: OmniCube CN-2200 front panel
Table 1: Front panel component descriptions
Callout
Component
Description
1
Power button
Controls power to the system and indicates whether
there is power to the system. If the indicator is green, the
system is receiving power.
2
Diagnostic indicators
Shows hardware error conditions.
3
System identification button System identification button and system identification
connector.
The system identification button helps you locate a
system within a rack. If you push the system identification
button on the back panel or the front panel, the system
identification buttons on the front panel and the back
panel flash blue. Push a system identification button a
second time to stop it from flashing.
The system identification connector, located to the right
of the system identification button, connects the optional
system status indicator assembly through the optional
cable management arm.
4
Retention latches
Locks the enclosure in the rack. You can push a latch to
release the enclosure and slide it out.