REV020620
SimpliPhi Power, Inc. | 3100 Camino Del Sol | Oxnard, CA 93030, USA | (805) 640-6700 |
| 13 |
ii)
Secure the cable lug(s) to the positive 5-point terminal block using a 17mmwrench socket to
tighten the ¼”-20 nut(s). The cables should include 3/8” lugs to fit onto the 3/8” posts on the
5-point terminal block.
iii)
Size the battery bussing-to-terminal block wires according to the number of batteries
connected in parallel and in compliance with local codes. Refer to Table 3 for guidance.
Figure 4 – Cables Wired from Each Interconnecting Busbar to the 5-Point Terminal Busbar
3 Battery Busbars = SKU# BB-3
(interconnecting busbar-to-terminal busbar
wiring
not included
)