REV020620
SimpliPhi Power, Inc. | 3100 Camino Del Sol | Oxnard, CA 93030, USA | (805) 640-6700 |
| 11 |
CAUTION: Do not place any material (such as a washer) between the large brass nut at the
base of the battery terminal and the interconnect. (Refer to the
terminals on a SimpliPhi battery video
Figure 3 – Interconnecting Busbars Attach to PHI Battery Terminals
Interconnecting busbars are not included with Enclosure.
10.
Wire the negative interconnecting busbar(s) (used to parallel the batteries) to the built-in negative 5-
point terminal block.
i)
Secure a cable (not included) to the ends of each negative interconnecting busbar (two cables
total are needed for two negative interconnecting busbars).
3 Battery Busbars =
SKU# BB-3
2 Battery Busbars =
SKU# BB-2