7
SimpliFire • SF-ALL48-BK, SF-ALL60-BK Service Manual Rev. B • 2040-960 • 3/18
10. Remove two (2) Phillips screws at the bottom of the
left and right side of the appliance opening. See
Figure 15.
2 SCREW LOCATION
Screws at
the bottom
of the left
and right side
of appliance
opening
14
SCREW LOCATION
11. Remove 14 Phillips screws at the top and bottom of
the flame screen. See Figure 16.
12.
Remove the flame screen.
Note:
Be sure to place on a flat surface with the
silk screen face-up. This is to prevent any
distortion on the screen.
13 Remove the center screw located in the the center
of the Rotisseire. See Figure 17.
CENTER SCREW LOCATION
14. Pull the Rotisseire to the left to disengage it from
the motor, then remove the Rotisseire assembly.
Figure 15. Screw Location
Figure 16. Flame Screen Location
Figure 17. Rotisseire Screw Location
If replacing only the Rotisseire,
install replacement
part and reverse the installation steps.
Be sure the flame screen is installed correctly with the
flame silk screen to the outside and flames at the bottom
of the appliance.
If replacing Motor
continue to the next steps 15-18.
Rotisseire Installation
If replacing Flame LED Light Board continue to step
19.
CAUTION! Risks of Cuts!
Rotisseire has sharp edges
that can cut skin. Always wear gloves when servicing the
Rotisseire and/or Flame LED and/or Rotisseire Motor.
