SimpliFire • SF-ALL48-BK, SF-ALL60-BK Service Manual • 2040-960 Rev. B • 3/18
2
Stone/Media Installation
1. Remove Glass.
2. Arrange the stone/media along the inset window
ledge at the front of the appliance.
Note:
Extra media are provided and may be
distributed based on consumer preference.
Not all media needs to be used.
Glass Replacement (Continued)
Installing Glass
3. Install front panel. Locate the J-hooks on the back
side of the glass on the four shoulder bolts on the
appliance opening. Engage the shoulder bolts.
See Figure 2.
4. Press down on top edge of glass to fully engage J-
hooks on the shoulder bolts.
Note:
Make sure the glass is fully attached to the fire-
box so that the control panel can work properly.
Figure 2. Glass Front Removal/Installation
5. Thread the two (2) ST3X8 screws into the threaded
holes on the glass panel. Check the alignment of
the glass panel and securely tighten the screws. See
Figure 3.
Figure 3. Secure Glass Front
