WINDING THE BOBBIN
1.
Release the clutch by turning the clutch knob
toward you.
2. Draw the thread from the spool through the
bobbin winder tension disc as shown.
3. Pull the end of the thread through the hole in
the bobbin as shown.
4. Place the bobbin onto the bobbin winder shaft
with the end of the thread coming from the
top of the bobbin. Push the bobbin winder
shaft to the right until it clicks. Holding onto
the end of the thread, start the machine.
When the bobbin is slightly filled, snip off the
end of the thread.
5. Wind the thread until the winder stops above
the bobbin. Clip the thread tighten the clutch
knob.
6. Tighten the clutch knob.
17
Retyped by Mastersewusa.com
