SEWING EMBROIDERY
Place the fabric in embroidery hoop. Place darning plate over
needle plate (see below). Lower the presser foot lifter. Hold the
embroidery hoop firmly with your hand.
While sewing the desired pattern, move the embroidery hoop
slowly and do not allow your fingers to get near the needle.
*Set the needle thread tension a little looser so that the bobbin
thread is not pulled through to the right side of fabric.
(see page 13).
*It is recommended to mark the required embroidery pattern on
the right side of the fabric
with a pencil or tailor’s chalk.
DARNING PLATE
There are few times when you want to control the feeding of the
fabric yourself. Raise needle to its highest position and raise
presser foot. Place darning plate over needle plate aligning two
pins of darning plate with holes of needle plate. You may then
determine the movement of the fabric yourself. See above for
embroidery.
27
Retyped by Mastersewusa.com
