2-7
4. Press the <ACK> key.
5. Press the <ACK> key again. The system responds by doing the following:
•
Displays two messages “Processing Action” and “Action Taken.”
•
If there are no other isolated points / zones, the system extinguishes the ISOLATE
indicator. (This indicator remains lit until all isolated points / zones are de-isolated.)
•
Removes the text “ISOL-ALARM” within the alarm’s text message.
•
Activates the EWS, if it is not isolated.
See “Resetting Points and Zones” for information on resetting a de-isolated point.
Isolating / De-isolating a Point / Zone,
Continued
De-Isolating a Point /
Zone Currently in
Alarm,
(
continued
)
Press ACK to confirm, ISOLATE to CANCEL
ZN2
will ALARM if DE-ISOLATED
firealarmresources.com
Summary of Contents for SafeLINC 4100
