2
Overview
Specifications
Refer to the following environmental and power specifications:
Overview
The remote display assembly (RDA) is a surface-mounted version of the Flexible User Interface. The
unit is mounted remotely from the FACP and wired back to it via remote unit interface (RUI) wiring.
Since the printed circuit boards and LCD are factory-installed within the RDA enclosure, hardware
installation consists of surface mounting the enclosure to the wall, and completing the RUI circuit
connection. The 4100-9401 Flexible User Interface remote display assembly contains the following:
•
Flexible User Interface panel assembly
•
566-141 transponder interface card (TIC)
•
Remote box 13”X20.5”
Figure 1. 4100-9401 Flexible User Interface Remote Display Assembly
Voltage
24V
Current Draw
186 mA Normal Standby
214 mA alarm
Temperature
32 to 120
o
F (0 to 49
o
C)
Humidity
Up to 93% (non-condensing) relative humidity at 90
o
F (32
o
C)
REMOTE BOX & DOOR
FLEXIBLE USER
INTERFACE PANEL
ASSEMBLY
TRANSPONDER INTERFACE
CARD
firealarmresources.com
