NAME
VALUE
1
2
3
15
17
19
21
27
20
10
11
16
13
1
1
1
1
2
1
1
1
1
2
2
Central LED
0x00 -> (Default value) Turns off the center LED
0xFF -> Turn on the center LED
0x00 -> (Default value) Disables timing
0x01-0x7F -> Sets a timing with a range of (1-127sec)
0x80-0xFE -> Sets a timing with range of (1-127min)
0x00 -> TOGGLE (Default value). A short press (t <2s) switches the load
0x01 -> ON. A short press (t <2s) activates the load
0x02 -> OFF. A short press (t <2s) deactivates the load
0x9867 -> Parameters, Groups and Z-Wave status are restored to the default values.
0x4312 -> Parameters, with the exception of Long Pulse Lock, are reset to default values.
[Byte 0]
0x00 -> Charging is disabled
0x01 -> Charging is activated
[Byte 1]
0x00 -> Charging is disabled
0xFF -> Charging is activated
0x00 -> (Default value) The long press (t> 2s) works as described in the
usage and signaling table
0xFF -> Pressing 2s <t <10s does not send Node Info
Pressing t> 30s resets the configuration parameters except Long
Hold Lock and sends a Node Info
0xFF -> The central LED flashes for 5 seconds at a frequency of 0.1s
0x00 -> (Default value) Enables the pushbutton to control the load
0xFF -> Disables the action of the pushbutton on the load
0x00 -> Restart with the relay disabled.
0xFF -> (Default value) Recover the previous state.
0x0000 -> (Default value) Disables custom consumption limit
0x0001 - 0xFFFF -> Sets the power in Watts that is supported (once the
load is over, it is disabled).
0x00 -> (Default value) Disables the beacon function
0x01-0x63 (1-100%) -> Sets the intensity of the beacon LEDs.
Custom consumption limit
Beacon
On Timed
OFF Timed
Delayed OFF
Load lock
Reset default (Write Only)
PostReset State
Action when pressing
Charge status (Read Only)
Long key press
Identify (Write Only)
SIZE
SIMON, S.A.U.
Diputación, 390-392 / 08013 Barcelona
Customer Technical Support: [email protected] Tel: (+34) 902109700
Made in Spain - www.simonelectric.com
A991750
18-
01-
20
21
1/5
COVER FOR
IO
SOCKET
ENGLISH
DESCRIPTION
Once plugged to 10002432-039 / 10002460-039 / 10002462-039 This Front permits the direct control of a load
plugged toggling it each time that the pushbutton is. It is also possible to control the load using Z-Wave devices.
Z-WAVE COMPLIANCE
This product can be included and operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers
and/or other applications. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase
reliability of the network.
* If the stop button is not pressed, the push button LED will blink red 3 times at a frequency of 0.5s
* Some of the functions can be changed depending on the configuration parameters.
** Please use this procedure only when the network primary controller is missing or otherwise inoperable.
KEYPAD USE & FEEDBACKS
LOAD
STATE
FEEDBACK
LEDS
EVENT
KEYPAD
ACTION
LOAD
ACTION
- Central LED blinks slow
- Feedbacks detailed on “Included
in a Z-Wave Network” are also
performed
OFF due to load a limit
consumption (LED1 red blinking)
- OFF with no load limit consumption
(LED1 white)
- ON with load limit
consumption (LED1 orange)
- Beacon, LEDs 1...7 set their
intensity according Param 3.
- ON with no load limit
consumption (LED1 green)
ON
OFF
Not included into a
Z-Wave Network
Included in a Z-Wave
Network
Not pressed
Short press (t<2sec)
Long press
2s<t<30s
Long press t>30s
Press key
Add/Remove to/
from Z-Wave
Network
Reset default**
- Error, Fast blink in Central LED.
LED1 turns green or orange
Central LED blinks until release of
Pushbutton
LED1 turns white
Main LED light up for 2.5 sec
The Node Information Frame is
sent via Z-Wave
Load is deactivated if load
consumption limit is exceeded
Load is deactivated if load
consumption (16A) is exceeded
Reset to default state
Load is activated
Load is deactivated
ASSOCIATION GROUPS
2 (Control)
“CTRL”
20
COMMAND_CLASS_BASIC_REPORT
It is sent to the associated nodes when the load changes state:
ON -> 0xFF
OFF -> 0x00
ID
Nombre
Max. Nodos
CommandClass
Asociadas
1 (Lifeline)
“LIFELINE”
3
COMMAND_CLASS_BASIC_REPORT
It is sent to the associated nodes when the load changes state:
ON -> 0xFF
OFF -> 0x00
COMMAND_CLASS_METER_REPORT_V4
It is sent to the associated nodes when the power consumed varies more than 10%
“Electric meter”, “Consumed”, “Watts”, Size 4, Precision 1, Value (W)
COMMAND_CLASS_DEVICE_RESET_LOCALLY_NOTIFICATION
The associated nodes are sent when the device is removed from the Z-Wave network
ID
Nombre
Max. Nodos
CommandClass
Asociadas
To remove it is necessary to use a tool applied in the marked areas.
CONFIGURACIONES
All These configurations are not restored to default when device is removed from network. COMMAND_CLASS_DEVICE_RE-
SET_LOCALLY -> DEVICE_RESET_LOCALLY_NOTIFICATION will be sent to inform controller that node has been removed from
network, but the device will keep the current configurations.
To restore the configurations values, please perform one of these actions:
- Use Command CONFIGURATION SET with default bit to 1 for each configuration parameter.
- Perform Reset Default Action via keypad pressing or configuration command default.
Z-WAVE SPECIFICATIONS
Z-WAVE DEVICE SPECIFICATION
Device Type
ON/OFF_POWER_SWITCH
Generic Device Type
GENERIC_TYPE_SWITCH_BINARY
Specific Device Type
SPECIFIC_TYPE_POWER_SWITCH_BINARY
Role Type
ROLE_TYPE_SLAVE_ALWAYS_ON
SUPPORTED COMMAND CLASSES
COMMAND_CLASS_ZWAVEPLUS_INFO_V2
COMMAND_CLASS_VERSION_V2
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
COMMAND_CLASS_BASIC_V1
COMMAND_CLASS_ASSOCIATION_V2
COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3
COMMAND_CLASS_POWERLEVEL_V1
COMMAND_CLASS_CONFIGURATION_V2
COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4
COMMAND_CLASS_METER_V4
COMMAND_CLASS_SWITCH_BINARY_V1
INSTALLATION
PULSADOR
BUTTON
Technical characteristics
10002432-039
10002460-039
10002462-039
90%HR
100
2X108-XXX
100
0X041-XXX
100
21110-XXX
100
02039-XXX
100
21109-XXX
100
02038-XXX
100
20126-XXX
100
02042-XXX
SIMON S.A. Declares that the radio equipment in this manual conforms with the 2014/53/EU directive.
The full text of the EU declaration of Conformity can be found on www.simonelectric.com.
