Additional slots
Ready for use only for this vent group
resp. if not failure indication (supply, fuses, line monitoring).
Slot 2 and/or 3:
(at the central relay module, type ES-ZL-100)
Slot 3:
(at the central relay module, type ES-ZL-100)
Slot 1:
(at the vent group module,
type ES-MR-100)
Install the repeat module at slot 3.
Connection or adjustment is not necessary.
=
=
=
=
=
Smoke exhaust triggered
Command “OPEN” for daily vent and
smoke exhaust
Command “CLOSE” for daily vent, wind/rain active
and smoke exhaust reset
“Mains OK” or if not “Mains failure”
Control panel ready for use or if not:
“collective failure indication” (complete SHEV group,
central vent + all vent groups as well as all appropriate supplies)
wind/rain detector active or central vent switch active
=
SHEV
OPEN
CLOSE
MAINS
OK
WTS
1
2
3
4
5
6
ON
OFF
Auxiliary relay module, type HR-195
Repeat module
Auxiliary relay module, type HR-195
=
Smoke exhaust triggered
SHEV
1
ON
OFF
=
=
=
=
Command “OPEN”, for daily vent and
smoke exhaust
Command “CLOSE”, for daily vent, wind/rain active
and smoke exhaust reset
“Mains OK”, or if not “Mains failure” only for supply of this group)
Wind/rain detector or central vent switch active
=
OPEN
CLOSE
MAINS
OK
WTS
2
3
4
5
6
DIP-Switch (ES-ZL-100)
WRES
RES
SHEV
CLOSE
OPEN
BMZ
RM
FTZ
ON
OFF
When the repeat module is used adjust the DIP switch to “OFF”
Installation manual ESM-T/X-EV (24 A / 48 A / 72 A)
Page 18/20
SIMON RWA SYSTEME GmbH, Passau
ESM-T/X-EV with power supply
Dublications, also in extracts, are only legal with express authorisation from SIMON RWA SYSTEME GmbH Passau
®
