8 BASE CONFIGURATION TIER II TO TIER III
This Procedure should be followed when configuring a Tier II SDB680
Base Station into a Tier III SDB680 Base Station.
TOOLS, TEST EQUIPMENT AND MATERIALS REQUIRED
The following Tools, Test Equipment and Materials will be required to perform this
procedure:
PC with the following Software Applications installed:
SDMT
Simoco IP Configuration Tool
Notes
(i). The software applications listed above are available for download on the Simoco
website http://www.simocowirelesssolutions.com via the Partner Portal. To access
the Partner Portal a Username and Password will be required.
(ii). To request access to the partner portal please contact your local business
development manager or alternatively contact the relevant Simoco Customer
Services (see Support Page for details).
8.1. TIER III BASE PREREQUISITES
Before commencing this procedure to configure a Tier II Base Station into a Tier III
Base Station, it is assumed that the base station has already been fitted into a rack and
is connected to the network as a Tier II Base.
It as also assumed that the SDMT and Simoco IP Configuration Tool software
applications have been installed on a PC and have previously been used.
8.2. SOFTWARE LICENCES
All Tier III Base Stations require a Software Licence in order to operate; these licences
can be obtained from Simoco. If a Tier III Base Station is added to an existing Tier III
system, the software licences for all the base stations on that system will have to be
updated.
It is assumed that all the relevant software licences required have been obtained
before commencing this procedure and that they have been uploaded onto a suitable
PC.
Doc Number:
TNM-I-E-0046 ISSUE 1.2
Page
49
