j. In the Comms History area, various messages for the reboot operation
will be displayed. Eventually, as the reboot of each base station in the
Tier III system is completed, an appropriate ‘Discovered Base’ message
will be displayed.
8.4.4. Configuration Creation and Upload
1. On the SDMT main screen, carry out the following:
a. Refer to Part 3 of the SDMT User Manual [2] and create a working
configuration that includes the new DMR Base and appropriate for the
system in which it is installed.
b. When creating a working configuration, ensure that any changes to the
configuration are saved by selecting the
<
icon that will be displayed on
the page tab of the relevant configuration pages. This will save the
changes to the local SQL Server ® database stored on the PC.
c. On the ribbon bar, select the System Commands button. The System I/O
configuration page will be displayed.
d. On the System I/O page, carry out the following:
i. In the ‘Select Read/Write System Areas’ box, depending on the configuration
you wish to write, select either the ‘Configuration’, the ‘Subscribers’ or both.
Select the ‘Write to System’ button.
ii. In the Comms History area, confirm that a ‘Starting Write All Config’
message is displayed.
iii. The progress of the write operation will be displayed in the ‘Current
Message Progress’ area.
iv. In the Comms History area, after a short delay, confirm that a ‘Completed
Write All Config’ message is displayed.
v. When the write operation is completed, the success or failure of the
operation for each VAC, Site or Base will be indicated in the Comms History
area.
8.4.5. Enable New Tier III Base
1. On system I/O page, in the System Monitor area, carry out the following:
2. On the navigation tree, right click on the new Tier III Base that you wish to
enable. Menu options will be displayed.
a. From the menu options, select ‘Base Operations’ > ‘Enable Base(s)’. The
base enable warning message will be displayed.
3. On the base enable warning message, select ‘Yes’ to continue.
4. On system I/O page, carry out the following:
a. In the System Monitor area, on the navigation tree, confirm that the
status notification that was alongside the relevant base has now
disappeared.
b. In the Comms History area, after a short delay, confirm that the
‘Completed Enabling Base’ message is displayed.
Doc Number:
TNM-I-E-0046 ISSUE 1.2
Page
53
