Simex SWE-94-U, User Manual

Page: 35 / 40

User manual - METER SWE-94-U
a) The answer (we assume that measurement is not out of range):
ADDR FUNC BYTE C DATA H,L CRC L,H
01 03 02 00 FF F8 04
DATA H, L - displayed value = 255, no decimal point.
Decimal point position can be read from reg. 03h.
b) The answer (if an error occur):
ADDR FUNC ERROR CRC L,H
01 83 60 41 18
ERROR - error code = 60h, bottom border of the measurement range is exceeded
2. Read of device ID code
ADDR FUNC REG H,L COUNT H,L CRC L,H
01 03 00 21 00 01 D4 00
The answer:
ADDR FUNC BYTE C DATA H,L CRC L,H
01 03 02 22 DB E0 BF
DATA - identification code (22DBh)
3. Change of the device address from 1 to 2 (write to reg. 20h)
ADDR FUNC REG H,L DATA H,L CRC L,H
01 06 00 20 00 02 09 C1
DATA H - 0
DATA L - new device address (2)
The answer (the same as the message):
ADDR FUNC REG H,L DATA H,L CRC L,H
01 06 00 20 00 02 09 C1
35