Simex SWE-94-U, User Manual

Page: 19 / 40

User manual - METER SWE-94-U
7.3.1. “inPt” menu (common parameters)
This menu presets the measurement input:
“
tYPE
" - type of the input / sensor. This parameter can be set to values:
” 0-20 ” - current input - range 0..20 mA,
” 4-20 ” - current input - range 4..20 mA,
”
0-5
” -
voltage input - range 0..5 V,
” 1-5 ” - voltage input - range 1..5 V,
” 0-10 ” - voltage input - range 0..10 V,
”
2-10
” - voltage input - range 2..10 V,
” 60 ” - voltage input - range 0..60 mV,
” 75 ” - voltage input - range 0..75 mV,
”
100
” -
voltage input - range 0..100 mV,
” 150 ” - voltage input - range 0..150 mV,
” Pt 1 ” - Pt 100 input,
”
Pt 5
” - Pt 500 input,
” Pt10 ” - Pt 1000 input,
” tc k ” - thermocouple input, type K,
”
tc S
” -
thermocouple input, type S,
” tc J ” - thermocouple input, type J,
” tc t ” - thermocouple input, type T,
” tc n ” - thermocouple input, type N,
” tc r ” - thermocouple input, type R,
”
tc b
” -
thermocouple input, type B,
” tc E ” - thermocouple input, type E.
For current and voltage inputs displayed values are defined by parameters
“Lo C” , ”Hi C” (or by user defined characteristic points) and parameter ”Pnt” .
”FiLt” - option allows to change the filtration time constant. Expressed in seconds.
Acceptable values range from 0 (no filtration ) to 255.
7.3.2. “inPt” menu (parameters of temperature inputs)
”Conn” - connection method of RTD input. This parameter can be set to values:
” 3 in ” - 3-wire method,
” 2 in ” - 2-wire method.
“toFS” - offset expressed in °C, range ± 9.9°C (for RTD input) or ± 99°C (for TC input). This
parameter allows shifting of measurement scale, and express value added to
calculated (measured) result.
The offsetting of a scale is realised independently of cold ends automatic
compensation.
19
i
i