Simex SRP-73, User Manual

Page: 45 / 56

User manual - METER SRP-73
11.1. LIST OF REGISTERS
Register Write Range Register description
01h No -999 ÷ 9999 Measurement value (no decimal point)
02h No 0h, A0h, 60h
The status of the current measurement;
0h
- data valid;
A0h
- top
border of the measurement range is exceeded; 60h - bottom border
of the measurement range is exceeded;
03h Yes 0 ÷ 3
“ Pnt ” parameter in “ InPt ” menu (decimal point position)
0 - “ 0 ”; 1 - “ 0.0 ”; 2 - “ 0.00 ”; 3 - “ 0.000 ”
04h Yes see descr.
State of the relays and alarm LED (binary format)
(1 - on, 0 - off):
00000000 000e00ba
a - relay R1; b - relay R2; e - alarm LED;
If written, only a , b bits are important (others are ignored) these
bits allows user to control the relays via RS-485 interface
06h No -999 ÷ 9999 Peak (drop) value (no decimal point)
10h Yes 0 ÷ 5
“ tyPE ” parameter in “ InPt ” menu (nominal input range).
0 - 0-20 mA range; 1 - 4-20 mA range; 2 - 0-10 V range;
3 - 2-10 V range; 4 - 0-5 V range; 5 - 1-5 V range
11h Yes 0 ÷ 5
“ CHAr ” parameter in “ InPt ” menu (characteristic type)
0 - linear ; 1 - square; 2 - square root; 3 - user defined; 4 - volume
characteristics of a cylindrical tank in the vertical position; 5 -
volume characteristics of a cylindrical tank in the horizontal position
12h Yes 0 ÷ 5 “ FiLt ” parameter in “ InPt ” menu (measurement filtering rate)
13h Yes 0 ÷ 3
“
Pnt
”parameter in “
InPt
” menu (the copy of 03h register, decimal
point position) 0 - “ 0 ”; 1 - “ 0.0 ”; 2 - “ 0.00 ”; 3 - “ 0.000 ”
14h Yes -999 ÷ 9999 “ Lo C ” parameter in “ InPt ” menu, no decimal point included
15h Yes -999 ÷ 9999 “ Hi C ” parameter in “ InPt ” menu, no decimal point included
16h Yes 0 ÷ 999
“ Lo r ” parameter in “ InPt ” menu, in 0.1%
17h Yes 0 ÷ 199 “ Hi r ” parameter in “ InPt ” menu, in 0.1%
18h Yes 0 ÷ 9999 “ t h1 ” parameter in “ InPt ” menu, no decimal point included
19h Yes 0 ÷ 9999
“ t h2 ” parameter in “ InPt ” menu, no decimal point included
1Ah Yes 0 ÷ 9999 “ t h3 ” parameter in “ InPt ” menu, no decimal point included
1Bh Yes 0 ÷ 9999 “ t d ” parameter in “ InPt ” menu, no decimal point included
1Ch Yes 0 ÷ 9999 “ t Sn ” parameter in “ InPt ” menu, no decimal point included
1Dh Yes 0 ÷ 9999 “ t Sh ” parameter in “ InPt ” menu, no decimal point included
20h 2 Yes 0 ÷ 199 Device address
21h No
20F7h
20F3h Device identification code (ID)
Device identification code (IP65 version)
22h 3 Yes 0 ÷ 7
“bAud” parameter in “rS” menu (baud rate);
0
- 1200 baud;
1
- 2400 baud;
2
- 4800 baud;
3
- 9600 baud;
4 - 19200 baud; 5 - 38400 baud; 6 - 57600 baud; 7 - 115200 baud
45