Simex SRP-73, User Manual

Page: 30 / 56

User manual - METER SRP-73
In example no 1 of the DISPLAY VALUES CALCULATION paragraph the
procedure of the permissible input range determining is presented in details.
If the measurement value do not exceeds permissible measurement range but
displayed value exceeds range -999 ÷ 9999, the warning
”-Ov-”
is displayed rather
than the calculated result.
7.3.3. ”bri” parameter
This parameter allows user to set bright of the LED display, bright can be set to
conventional values from 1 to 8.
7.3.4. ”CoL” menu
This menu contains settings related to signalisation via display colour. This kind of
signalisation consist in change of display colour (from basic colour to „active” colour) in defined
situations, for example after change of R1 state.
“SCoL”
- basic colour ( the second one becomes „active” colour):
”grEE” - main colour is green,
”rEd” - main colour is red.
“C r1”,“C r2” - control the display colour according to relay (R1, R2 separate )state :
”oFF” - control for particular relay is off,
”on”
- control for selected relay is on, the display will change its colour after
selected relay becomes active.
“C AL” - control the display colour according to alarm situations :
”oFF” - control is off,
”on”
- control is on, the display will change its colour after alarm situation occurs.
“C Pr” - this setting enables additional threshold for display colour controlling, detailed
conditions of this control are defined by „
dir ”, „ SEtP ” and „ HySt ” parameters of
„ CoL ” submenu.
”oFF” - no additional threshold.
”on”
- additional threshold enabled, the display will change its colour after result
satisfy conditions defined by „
dir ”, „ SEtP ” and „ HySt ” parameters of „ CoL ”
submenu.
“dir” - this parameter defines the direction of result changes activating change of display
colour:
”morE” - display will change its colour after the result is higher than
thrhysteresis
”LESS” - display will change its colour after the result is lower than
thr hysteresis
30
i